Product Description

The SpectRIM™ Slide is a 3.0X1.0X0.1 inch plastic carrier with an optically flat 0.9X0.9 inch stainless-steel plate coated with an ultra-thin (<50 nm) hydrophobic layer. The SpectRIM Slide is ideal for micro-Raman and reflectance IR spectroscopy and reflectance light microscopy. The dimensions of the SpectRIM Slide make it compatible with most types of microscopic analyses and optical and robotic instrumentation for array technologies, including high throughput devices.

The SpectRIM™ Slide’s substrate is a chemically inert hydrophobic stainless steel surface, ideal for measuring small quantities of material, especially from dilute solutions in polar solvents (such as water). When applied to the substrate, the sample will bead up and dry with a smaller diameter than when applied to an untreated surface. The ultra-thin hydrophobic layer displays no appreciable Raman, IR or fluorescence signal.

Storage and Handling

1. Store the SpectRIM Slides at room temperature.

2. Avoid storing the slides in a damp or moist environment.

3. Keep the slides in the box to avoid any dust and contamination.

4. Avoid direct contact with the metal surface of the slide to avoid contaminating or scratching the substrate.

5. Use the plastic areas of the slide located on both sides of the coated metal substrate plate to handle the slide.

6. Do not touch the coated metal area of the Substrate with a pipette tip! It can scratch the surface.

7. Re-using a substrate is not recommended. Washing the Substrate can result in adsorption of traces of contaminants on the surface or scratching of the surface thus significantly compromising the hydrophobic and optical characteristics.

General Precautions

1. This Tienta Sciences product is sold for research purposes only.

2. The SpectRIM substrates are not for use in human diagnostics or for drug purposes, nor are they to be administered to humans in any way.

Liquid Samples

1. Hold the pipette tip just above the substrate.

2. Dispense the sample.

3. If the sample hangs on the pipette tip, slowly bring the drop in contact with the surface of the substrate.

4. Do not touch the coated metal area of the Substrate with a pipette tip! It can scratch the surface.

Solid Samples

1. Drop the solid sample onto the substrate.

2. Do not touch the coated metal area of the Substrate! Touching the surface can scratch surface.

Important Information

1. All Substrates are subject to extensive quality control and are guaranteed to perform as described when used properly.

2. Any problems with this product should be reported to Tienta Sciences, Inc. immediately.

3. Our liability is limited to the replacement of the product, or a full refund.

4. Any misuse of this product is the full responsibility of the user, and Tienta Sciences makes no warranty or guarantee under such circumstances

Additional information and ordering
Worldwide www.tientasciences.com

Technical Contact Information
Tienta Sciences, Inc.
351 West 10th St. Indianapolis, IN 46202
Phone: (317) 278-8185
Fax: (317) 278-8190
www.tientasciences.com

Tienta Sciences technical staff would be happy to help you with the development of your applications.